Influence of Hybrid Steel –Polypropylene Fibers on the Mechanical Properties of Normal Concrete

Authors

  • shahzinan Jawad Zaezue Civil Engineering Department ,College of Engineering ,University of Thi-Qar , Thi-Qar,Iraq
  • Waleed Khalid Hadi Civil Engineering Department , College of Engineering,Mazaya University College,Thi-Qar, Iraq

DOI:

https://doi.org/10.31663/tqujes13.1.439(2023)

Keywords:

hybrid fiber ,splitting tensile strength ,modulus of elasticity, polypropylene fiber

Abstract

This paper purposes is o study the influence of hybrid Steel-Polypropylene fibers on workability , compressive strength, splitting strength ,  and modulus of  elasticity of ordinary  concrete. For this purpose four  mixes in addition to a control  normal  concrete mixture  were prepared. The volume of steel fiber was ( 0.75% and 1.5%) and the volume of polypropylene fiber was (0.15% and 0.3 %) . Results show that all concrete mixes including hybrid fiber had lower slump flow than the control mix (0%) .In comparison to other forms of concrete without fibers, hybrid concrete with steel and polypropylene fibers shown an increase in compressive, splitting, and elasticity modulus. According to the test results, the hybridization ratio (1.5% steel and 0.3% polypropylene) maximum increase ratio in compressive and splitting tensile strengths of 32% and 69%, respectively, above the reference mix.

Downloads

Published

2023-12-01

Issue

Section

Articles

How to Cite

Influence of Hybrid Steel –Polypropylene Fibers on the Mechanical Properties of Normal Concrete. (2023). University of Thi-Qar Journal for Engineering Sciences, 13(1), 34-39. https://doi.org/10.31663/tqujes13.1.439(2023)

Similar Articles

31-40 of 74

You may also start an advanced similarity search for this article.