Experimental Deformation Analysis of Ship Hull Subjected to Vibration Waves

Authors

  • Kadim Karim Mohsen Mechanical Engineering Department ,College of Engineering, University of Thi-Qar ,Thi-Qar, Iraq
  • Nisreen N. Dawod Mechanical Engineering Department ,College of Engineering, University of Thi-Qar ,Thi-Qar, Iraq

DOI:

https://doi.org/10.31663/tqujes.10.2.368(2019)

Keywords:

Dynamical strain, Signals, vibration response, Hogging &Sagging

Abstract

 

             

This paper includes an experimental study of the effect of dynamical vibration (harmonic waves) or wind on the deformation of the ship hull when it is in the case of pitching motion and rolling. The aim of this paper is to calculate the strains of the ship as a result of the effect of waves on it. Aluminum alloy was used to build the frame of the model with suitable dimensions, and then fixed the model on the vibrating system which consists of number of springs with limiting stiffness. Vibrating system supported with means to generate waves with (0.75Hz, 1Hz, 1.25Hz) frequencies. The deformations are measured at the pitching and rolling motion of the model. The results showed that the strains of the model in the pitching motion greater than the rolling motion. When the frequency increases, the strains are increases

 

Downloads

Published

2019-12-01

Issue

Vol. 10 No. 2 (2019)

Section

Articles

License

Copyright (c) 2019 The Author(s), under exclusive license to the University of Thi-Qar

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Experimental Deformation Analysis of Ship Hull Subjected to Vibration Waves . (2019). University of Thi-Qar Journal for Engineering Sciences, 10(2), 44-51. https://doi.org/10.31663/tqujes.10.2.368(2019)